Hot Water Tank Maintenance in Reno, NV

Dependable Hot Water Tank Maintenance Services in Reno, NV

Electric Element and Thermostat Service in Reno

Electric tanks rely on upper and lower heating elements that get crusted with scale in hard water. We test each element with a meter, check the thermostats and look for scorched wires at the terminal block. If an element has failed we replace it with the matching wattage and voltage. Many families who think they need a new heater just need a lower element and a flush.

Electric Hot Water Tank Element Check in Reno

Electric hot water tanks rely on heating elements to warm the water. During maintenance, our plumbers inspect these elements for signs of wear, corrosion or burnout. We also check the thermostat settings and wiring connections to confirm they are functioning correctly and safely. This preventative check can identify failing elements before they stop heating altogether, preventing unexpected cold showers for your family in Reno.

Pressure Relief Valve Testing in Reno

A properly working temperature and pressure relief (T&P) valve is a crucial safety device for any hot water tank. Our technicians will test this valve to ensure it's not stuck or leaking, preventing dangerous pressure buildup within the tank. We verify it opens and closes correctly, and if it fails, we will suggest immediate replacement to keep your Reno home safe and compliant with plumbing codes.

Bradford White & Rheem Tank Maintenance in Reno

We are experienced in maintaining all major hot water tank brands, including popular models from Bradford White and Rheem, often found in Reno homes. Our technicians are familiar with the specific components and maintenance requirements for these brands, making sure your unit receives brand-specific care. We use correct parts and techniques to keep your system running well.

Burner and Pilot Light Maintenance in Reno, NV

For gas hot water tanks, proper burner and pilot light operation is essential for efficient heating. Our service includes cleaning the burner assembly to remove dust and debris that can impede combustion. We also check and adjust the pilot light, making sure it ignites reliably. This attention to detail prevents common issues like intermittent hot water or complete heating failure, which can be frustrating for homeowners in Reno, NV.

Standard Hot Water Tank Tune-Up in Reno

FMR Plumbing offers a complete tune-up for conventional hot water tanks, focusing on critical components. This includes draining the tank to remove sediment buildup, which is crucial wherever water carries minerals, and inspecting the anode rod for signs of corrosion. We also check heating elements, thermostat settings and all pipe connections for leaks. Our goal is to optimize your tank's performance and prevent future issues.

Anode Rod Inspection and Replacement in Reno, NV

The anode rod, often called the sacrificial rod, is vital for preventing corrosion inside your hot water tank. Water chemistry varies from one neighborhood to the next, and it changes the rod's lifespan. Our technicians inspect the anode rod for wear and recommend replacement if it's badly corroded, typically every 3 to 5 years. Replacing a worn anode rod is a cost-effective way to protect your tank from rust and leaks, saving you from a full tank replacement.

Sediment Flush and Descaling in Reno

Hard water leaves calcium carbonate behind every time the burner heats the tank. Over a year that layer can harden into chunks that insulate the water from the flame and cause loud popping. We connect a hose to the drain valve, flush with full line pressure and agitate the bottom until the water runs clear. When scale is severe we use a descaling solution approved for potable systems. A clean tank heats faster and puts less stress on the bottom seam.